FLUX flow meters FMC 250, built to the nutating disc principle (FMC), are designed for the stationary use in e.g. piping systems. With the evaluation unit FLUXTRONIC? filling and dosing processes of almost all kinds of fluids can be performed with maximum precision and highest safety. In automatic mode it is possible to output a signal for control purposes with the evaluation unit and the use of a switching amplifier. This way e.g. motor and / or magnetic valve and the most different processes can be controlled.
Technical data:
Flow rate: min. 25 l/min - max. 250 l/min
Filling accuracy: /- 1 %
Operating pressure: max. 6 bar
Size of solids: max. 1,5 mm
Viscosity: min. 1 mPas - max. 2500 mPas
Housing Materials: Polypropylene, Polyvinylidene fluoride
Media / Fluids: Acids, Alkalis
Product attributes
Nutating disc meter
Inductive counter - independent of the conductance of the medium
Insensitive to small solids
Easy Handling
Easy assembly on pump
No metals in the medium area- also for non-lubricating media
High resistancy
No mains connections required
Benefits
Insensitive to small solids
Easy Handling
Control by PLC possible
Easy assembly
Batch operation possible
Media examples
Housing material PP:
Battery acid, formic acid, ammonia, formic acid, boric acid, brake fluid, calcium chloride, acetic acid, ferric-III- chloride, photo developers, glycol, mineral oil, sodium hydroxide, phosphoric acid, hydrochloric acid, sulfuric acid to 60 % tartaric acid, zinc chloride, citric acid
Housing material PVDF:
Hydrobromic acid, chloric acid, carbonic acid, hydrofluoric acid, potassium bromide, sodium hypochlorite, paraffin emulsion, nitric acid to 75 % sulfuric acid to 98 %, trichlorobenzene, hydrogen peroxide