IC Filling Systems supply recyclable glass bottle washers for outputs from 500 containers per hour up to 76,000 containers per hour. Semi -Automatic Model Washing cycle: A – Manual loading of the dirty bottles: the operator, open the cover and positions manually the bottles in the special washing stations. The machine is predisposed for contain 15 dirty bottles. B – Once closed the cover, the bottles are run over (internally and externally) from a big flow of warm water with detergent (NaOH 1~3% – 70°C) for effect the washing and the label removal. C – Finishing the washing, the operator manually moves the bottles washed by the washing station to the rinsing station, freeing the place for other dirty bottles. It positions other dirty bottles in the special washing stations and, once closed the cover, it restarts the machine. D – Finishing the new washing/rinsing cycle, the operator removes washing and rinsing bottles from the machine, manually moves the washed bottles by the washing station to the rinsing station and loading the new dirty bottles in the washing stations.

This machine is equipped with: 1 – The machine is in compliance with Machine Directive 2006/42/CE dated May 17 2006. 2 – Frame
of the washer made with plates and outlined in stainless steel type Aisi 304. Outside finishing with external micro glass ball.

The internal tanks are with inclined bottom for facilitating cleaning, and suitably profiled to equip the structure with greater
rigidity and resistance. Ample doors in stainless steel are provided for cleaning the tanks and principal cover in steel glazed
inox, hinging at the structure with opening system “easy-open”. 3 – Safety protection (with safety limit switch) positioned on
 the opening cover: when the operator open the cover the machine instantly jams the washing operation. 4 – Inside washing system
made with special penetrating nozzles at high pressure. External washing and labels removal made with special nozzles with high
flow rate and low head. The water currents are carried on a filter (always made in stainless steel) for filtering the detergent
solution and for separated the labels. The pumps are of the monoblock centrifugal type with pump body and impeller in stainless
steel type AISI 316. The external showers are of “easy maintenance” because extremely easy to get off and to clean. 5 –
Rinsing stations made with special penetrating nozzles and the external rinsing made through nozzles fed by the net water.

On the rinsing alimentation (mains water supply) there is installed an economy valve that interrupts water flow to the machine
when it is stopped. 6 – The detergent solution heating plant can be furnished, without price variation with: – heating exchanger
 (always made in stainless steel ready for steam alimentation, automatically control by an electro-pneumatic valve with respective
 condensation vents; – incorporated combustion room (included burner); .- electric heating. The washing temperature is easily
adjustable through a thermostat. 7 – Ball valve for the detergent tank emptying. 8 – Utility connections at a single point 9 –

Electrical circuit (in IP55) with power cabin in stainless steel installed on board the machine. The 24 V control panel, always
made in stainless steel, is equipped with led and push bottom for visual monitoring of all operations and parts. 10 – Chimney
for the vapors spillage from the machine, predisposed for a possible steam extractor application. 11 – Adjustable feet
positioned along the sides of the machine.

Fully Automatic Model Washing cycle            
Single ended bottle washers from one to six soaking tanks from 500 bottles per hour upwards to 76,000 bph         
Double ended bottle washer up to 60,000 bottles per hour and with six soak tanks. Special attention has been focused on
energy saving features and reduction of maintenance for the above units. We also manufacture plastic crate washers.
These crates are used typically in the beer bottling industry but can also be found in many other industries.

IC FILLING SYSTEMS can supply industrial Recyclable glass bottle washing machines from output speeds of 500 bottles per hour up
to 76,000 bottles per hour.