Areas of application
KNOLL centrifugal pumps are suitable for immersion into the medium. They can be mounted on pressureless tanks or chutes.

 The pumps are applied at machine tools for supply with cleaning of cooling lubricant as well as application on cleaning equipment and degreasing units.

 There are 4 different types available:

Type TG with closed impeller
For precleaned coolant lubricant, volume flow up to 1600 l/min,pressure up to 6 bar, grain size up to 3 mm.

Type TF with open impeller
For dirt coolant lubricant, volume flow up to 1000 l/min,pressure up to 2.4 bar, grain size up to 30 mm.

Type TS with helical impeller
For dirt and aerated coolant lubricant, volume flow up to 600 l/min, pressure up to 1.8 bar, grain size up to 15 mm.

Type TSK with short helical impeller
For very dirt coolant lubricant with abrasive chips, volume flow up to 700 l/min, pressure up to 1.7 bar, grain size up to 20 mm.

Construction

Type •Vertical design
•Normal suction, single stage, without sealing
•Extended taper bore mounted motor axle with centrifuge ring
•Pressure connection is radial and bent upwards, suction connection is axial
•With pump plate and pressure pipe

• 
  40_eng.pdf
  13554 KB
  美国
• 
  centrifugal_pumps.pdf
  2727 KB
  美国