Description
Titration analysis of process parameters, until recently carried out only in the laboratory, is moving into a new era. New, increasingly automatic systems require the continual monitoring of process variables but feedback from laboratory testing simply isn't fast enough for today's needs. There is a growing need to transfer titration procedures from the laboratory to the production line itself and the answer to this problem lies in the use of specific and personalized automatic titrators which can be used directly on site. The Maselli AT-02 Titrator, designed to be used directly on the production line for multi-parametric analyses on a wide range of products is the perfect solution.
The AT-02 unit: multifunctional analysis centre
The AT-02 Titrator has been designed for use in working environment conditions without the need for specialized personnel.The AT-02 can be used as an 'analysis centre' checking various processes simultaneously and carrying out different types of analysis for each process. The integrated multifunctional unit is held within a stainless steel, air-tight container using simple and robust mechanical components; the hardware system allows samples to be taken from 6 lines and can carry out various analyses per line. The unit ensures that automatic self-calibration programmes are routinely carried out, its clear and simple operative menus are easy to use by non-specialized personnel and high standard personalized options can be configured directly from a keyboard by qualified personnel.
Technical
features
Application:
|
Measurement, On/Off regulation and Multiparametric
Analyses of liquids on process lines with completely automatic cycles.
|
pH measurement:
|
0…14 pH ; ± 0.1
|
Redox measurement:
|
0…2000mV; ± 1 mV
|
Conductivity measurement:
|
0...20mS/cm ±0.1mS/cm
|
Fluorides measurement:
|
100...1000 ppm; ±1 ppm
|
Concentration measurement:
|
1.3330...1.5200
nD
|
Product temperature:
|
0°C... 45°C with automatic compensation of temperature
measured by means of temperature sensor Pt100 in nylon
|
Power Supply:
|
AC 115/230V ±10% 50...60Hz 200VA
|