GH Series Gravimetric Weigh Hopper is designed to control your extrusion process based on a weight-per-length process control. The GH Series extrusion control system tracks your extruder screw speed and continually learns the rate of each extruder screw revolution. The unit then adjusts the extrusion speed or haul-off reel speed (optional) to keep the product weight-per-length consistent. The GH unit adjusts for varying product weights, flow characteristics, and varying extrusion pressures, such as plugged screen packs and other factors.

The GH unit can be adjusted to a preset weight-per-length (grams/meter, pounds/foot or customer-specified) specification, or you can set it to hold the existing extrusion parameters set. When used as a stand-alone control, it is ideal for a typical mono-layer extrusion application. When used with the CoExpert control system, multiple extruders can be controlled at the same time, providing for an unparalleled system control and material savings.

Standard Features:

Surge hopper with refill valve
Mass flow weigh hoper design first in/first out material flow to eliminate segregation
High accuracy, precision cantilever load cell
Optional Features:

Ethernet Communications port
Lid for non-Sterling loader/receiver
Please see Technical Specifications for additional Standard and Optional Features

• 
  1ts-sterling-accumeterseries-final.pdf
  830 KB
  美国
• 
  1manual-blend-gh-touchscreen.pdf
  3189 KB
  美国
• 
  1qs-blend-sterling-gh.pdf
  516 KB
  美国