What if you could...


Continuously monitor sludge discharge for up to 50% solids?

Use rugged in-tank mounted 316 stainless steel sensors?

Have a choice of flanged pipeline sensors for in-line density?

Detect the blanket level for primary and secondary sludge, and industrial slurries?
The Mobrey MSM400 Series:

•
Can continuously monitor the suspended solids or sludge density contained in, or flowing from, a clarifier or settlement tank during de-sludging
•
Forms a measurement and control solution when used with a
Mobrey tank-mountable stainless steel gap sensor or
Mobrey flanged pipe-section with built-in stainless steel gap sensor
•
Is available as two different versions:
Mobrey MSM400 control unit with a 1 MHz / 3.3 MHz sensor)
Mobrey MSM401/S1 control unit with a 3.7 MHz sensor
•
Gives a bright and clear indication of the measured value in poor light conditions
•
Provides a 0/4–20 mA and HART output signal of the measured value
•
Has a tough weatherproof wall-mountable enclosure
•
Provides inputs and outputs for connecting to systems
(see the Specifications tab or product data sheet for details)

Features & Benefits
Control unit

•
A back-lit display, giving a bright and clear indication of the calculated process value and the status of all inputs and outputs
•
A six-button keypad and a menu system for local application configuration
•
Remote application configuration and monitoring is supported using a Field Communicator or a smart wireless THUM™ adapter
•
Accepts a voltage-free contact closure input that can perform various control actions
•
Two SPDT (single-pole-double-throw) relays for control and alarm indication purposes
•
Provides the automatic control sequence to start a pump or control a valve for sludge or settled product removal
•
Auto-selection of AC or DC power supply, allowing back-up if one power supply fails

Gap sensors

•
Standard 1 / 3.3 MHz dual-operating-frequency gap sensor for MSM400 control unit. Options for tank-mountable or pipe-section version
•
Special 3.7 MHz stainless steel gap sensor for MSM401/S1 control unit, tank-mountable only. Specially designed for Red Mud decanters that are used in the production of aluminium oxide from Bauxite(please contact an Emerson Process Management representative for additional information)
•
Intrinsically safe approvals for standard 1 / 3.3 MHz gap sensor


Applications

• 
  RML062.pdf
  326 KB
  美国
• 
  IP257.pdf
  654 KB
  美国